Robotic pool cleaners are one of the best ways to clean your pool. They climb walls, clean tile line and can usually do the same as a regular pool cleaner plus they are stand alone and don’t use suction or pressure from your pool system to function. That being said, they can also have problems and it is important to repair them so they can continue working properly.

A robotic pool cleaner is a complicated machine that has many moving parts and the potential to break down if not taken care of properly. Luckily, it is fairly easy to do some basic robotic cleaner repair yourself or with the help of a professional. Most of the problems that come up are simple to fix and can be done at home with little or no cost.

Often the first thing to do is check the power cord to see if it is plugged in correctly. There could be a tangle in the cable that is putting pressure on the cord and pulling it out of the outlet. It is also important to make sure there is enough slack in the cord so it is able to move freely. If the cord is plugged in and the power supply light is on but your cleaner still does not move, there may be an issue with the drive motor. Check your owner’s manual to see if it describes this problem and the recommended steps to correct it.

The hose that connects to the robotic cleaner can get quite tangled and can obstruct the flow of water which will slow down the cleaner’s movements. It is a good idea to inspect it regularly and remove any obstructions such as toys or leaves that might have got into the hose. If the hose is too short to reach all areas of the pool it can cause the cleaner to get stuck and not be able to complete a full circle of the pool. It is a good idea to have an extra hose on hand just in case you need to replace an old or damaged one.

If your cleaner is not climbing the walls or not cleaning the pool floor as it should be, this can often be resolved by adjusting the cleaner pattern or speed. Changing these settings can allow the cleaner to approach the wall more easily and get traction. In addition, some cleaners have adjustable suction so you can experiment with different levels to determine which gives the best results. If the above troubleshooting methods don’t work, it is always a good idea to consult your manufacturer’s manual as they will often have specific reset and restart instructions that should be followed carefully. If you are having a difficult time repairing your robotic cleaner or need to know more about how to maintain it properly, contact us or visit our store to speak with our knowledgeable staff. We can help you keep your pool looking its best!